RDE Connects

rde Connectors & Cables Inc.
5277 NW 108 Ave. Sunrise, FL 33351

Sheet 1: C-D-01

CONINVERS®
Shielded Connectors M17/Speedcon Series ST
Technical Data
Shell material
Machined components: Copper-Zinc alloy (CuZn)
die cast components: Zinc (GD-Zn)
Shell plating: Nickel (Ni) plated
Cable entry: max. 10 mm
Insulator
Connector inserts: Polyamid (PA66),
Contacts
Contact material: Copper-Zinc alloy (CuZn)
Contact plating: Nickel (Ni) with gold (Au) passivated
Contact termination: crimp type
Sealing
Sealing rings: Fluor rubber (FPM) All connectors with universal
Gaskets: Fluor rubber (FPM) shielding material for different
jacket and shield diameters.
Temperature
Temperature (long term) Celsius: - 20 °C up to +125°C
Temperature (long term) Fahrenheit: - 4 °F up to + 257 °F
Mating
Female coupling nuts: M17, or M17 in Speedcon
Male receptacles: M17, or M17 in Speedcon EMC
Mating cycles: Standard min. 50 shielding
Protection
Protection class : IP 67 (mated) depends on which cable gland is used
Number of positions 4 6 7 8 9 17
Number of contacts 3 + PE 5 + PE 6 + PE 7 + PE 5+3+PE 12 17
Contact dia. (mm Ø) 2 1 1 1 0.6 - 1 - 1 0.6 0.6
Rated current at 25°C (A) 20/25 14 14 14 3.6
Rated voltage (V) 630 630 630 630 both items 63
Test voltage (Volt AC) 4,000 6,000 6,000 6,000 are in 1,500
Overvoltage category DIN EN 61984-2001 ||| ||| ||| ||| preparation |||
Installation altitude above sea level 3,000 m 3,000 m 3,000 m 3,000 m 3,000 m