RDE Connects

rde Connectors & Cables Inc.
5277 NW 108 Ave. Sunrise, FL 33351

Sheet 1: C-F-01

CONINVERS®
Connectors M23 Series RC
Technical Data
Shell material
Machined components: Copper-Zinc alloy (CuZn)
die cast components: Zinc (GD-Zn)
Shell plating: Nickel (Ni) plated
Cable entry: max. 18 mm
Insulator
Connector inserts: Thermoplastic polyester (PBT), Polyamid (PA66),
Contacts
Contact material: Copper-Zinc alloy (CuZn)
Contact plating: Nickel (Ni) with gold (Au) passivated
Contact termination: Solder cup, crimp type, screw type, dip solder
Sealing
Sealing rings: Fluor rubber (FPM)
Gaskets: Fluor rubber (FPM), or Perbunan (NBR) stiffened gaskets
Temperature
Temperature (long term) Celsius: - 40 °C up to +125°C
Temperature (long term) Fahrenheit: - 40 °F up to + 257 °F
Mating
Female coupling nuts: M23 screw locking
Male receptacles: M23 screw locking EMC EMC
Mating cycles: Standard min. 50 without shielding
Protection
Protection class : IP 67 (mated) depends on which cable gland is used
Number of positions 6,7 9 (8+1) 9 (6+3) 12 16 17 19 (16+3)
Number of contacts 6,7 8 1 6 3 12 16 17 16 3
Contact dia. (mm Ø) 2 1 2 1 2 1 1 1 1 1.5
Rated current at 25°C (A) 20 8 20 8 20 8 8 8 8 10
Rated voltage (V) 250 150 150 150 150 150 150
Test voltage (Volt AC) 2,500 1,500 1,500 1,500 1,500 1,500 1,500
Overvoltage category DIN EN 61984-2001 II II II II II II II
Insulation resistance (Ω) ≥1016 ≥1016 ≥1012 ≥1012 ≥1012 ≥1012 ≥1012
Contact resistance (mΩ) ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
Pollution degree acc. to IEC 664-1 2 (31) 2 (31) 2 (31) 2 (31) 2 (31) 2 (31) 2 (31)
Contact resistance (mΩ) ≤3 ≤3 ≤3 ≤3 ≤3 ≤3 ≤3
Pollution degree acc. to IEC 664-1 2 (31) 2 (31) 2 (31) 2 (31) 2 (31) 2 (31) 2 (31)