RDE Connects

rde Connectors & Cables Inc.
5277 NW 108 Ave. Sunrise, FL 33351

Sheet 3: F-B-03

Strain Reliefs and Accessories
High Performance Cable Glands
High Performance Strain Reliefs
Applications Features
Strong Strain Relief for straight-through cable entries. Material: stainless steel
These Strain Reliefs seal cable entries and prevent Temp: -40C to +120C (-40F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-789...
Dimensions mm (inch) - Part Numbers
Thread Thread Width Thread Approx. Cable entry Part Metric sizes
mm-size O.D. across flats length total length Cable dia. Number
M12x1.5 12(0.47) 14 mm 5.0(0.19) 25.0(0.98) 05-07(0.19-0.28) GH-387.1200.1 Stainless
M16x1.5 16(0.63) 17 mm 5.5(0.22) 28.0(1.10) 05-10(0.19-0.39) GH-387.1600.0 Steel
M20x1.5 20(0.79) 22 mm 6.0(0.24) 28.0(1.10) 09-14(0.35-0.55) GH-387.2000.0
M25x1.5 25(0.98) 30 mm 7.0(0.28) 30.0(1.18) 13-19(0.51-0.75) GH-387.2500.0
M32x1.5 32(1.26) 34 mm 8.0(0.32) 36.0(1.42) 15-22(0.59-0.87) GH-387.3200.0
M40x1.5 40(1.57) 44 mm 8.0(0.32) 40.0(1.57) 22-28(0.86-1.10) GH-387.4000.0
Applications Features
Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated
These Strain Reliefs seal cable entries and prevent Temp: -40C to +120C (-40F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-785/786...
Thread Width Thread Quantities of holes Part Metric sizes
mm-size across flats length with diameters in mm and (inches) Number
M16x1.5 17 mm 5.5 mm (.21) 2 holes with 4 mm (.16) GH-366.1604.2
M16x1.5 17 mm 5.5 mm (.21) 2 holes with 4.5 mm (.18) GH-366.1605.2 Multiple
M16x1.5 17 mm 5.5 mm (.21) 3 holes with 4 mm (.16) GH-366.1604.3 Cable
M20x1.5 22 mm 6 mm (.24) 2 holes with 6 mm (.24) GH-366.2006.2 Entries
M20x1.5 22 mm 6 mm (.24) 2 holes with 4 mm (.16) GH-366.2004.2
M20x1.5 22 mm 6 mm (.24) 3 holes with 5 mm (.20) GH-366.2005.3
M25x1.5 30 mm 7 mm (.28) 2 holes with 7 mm (.28) GH-366.2507.2
M25x1.5 30 mm 7 mm (.28) 2 holes with 8 mm (.32) GH-366.2508.2
M25x1.5 30 mm 7 mm (.28) 2 holes with 9 mm (.36) GH-366.2509.2
M25x1.5 30 mm 7 mm (.28) 3 holes with 7 mm (.28) GH-366.2507.3
M25x1.5 30 mm 7 mm (.28) 3 holes with 8 mm (.32) GH-366.2508.3
M25x1.5 30 mm 7 mm (.28) 4 holes with 7 mm (.28) GH-366.2507.4
M25x1.5 30 mm 7 mm (.28) 8 holes with 1.5 mm (.06) GH-366.2501.8
M25x1.5 30 mm 7 mm (.28) 2 holes 1 x 5 mm (.20) and 1 x 12 mm (.47) GH-366.2512.2
M40x1.5 66 mm 8 mm (.32) 2 holes 1 x 7 mm (.28) and 1 x 14 mm (.55) GH-366.4014.2
M40x1.5 66 mm 8 mm (.32) 2 holes 1 x 10 mm (.40) and 1 x 15.6 mm (.61) GH-366.4016.2