RDE Connects

rde Connectors & Cables Inc.
5277 NW 108 Ave. Sunrise, FL 33351


Overview

F-B-01 F-B-02 F-B-03 F-B-04 F-B-05 F-B-06 F-B-07 F-B-08 F-B-09 F-B-10 F-B-11 F-B-12


Sheet 1: F-B-01

Strain Reliefs and Accessories
High Performance Cable Glands
High Performance Strain Reliefs
Applications Features
Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated
These Strain Reliefs seal cable entries and prevent Temp: -30C to +120C (-22F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-780/784...
Dimensions mm (inch) - Part Numbers
Thread Thread Width Thread Approx. Cable entry Part PG-Sizes
PG-size O.D. across flats length total length Cable dia. Number
PG 7 12.5(0.49) 14 mm 5.0(0.19) 25.0(0.98) 3-6.5(0.12-0.26) GH-351.0700.0
PG 9 15.2(0.60) 17 mm 6.0(0.24) 28.0(1.10) 5.5-10(0.22-0.39) GH-351.0900.0
PG 11 18.6(0.73) 20 mm 6.0(0.24) 28.0(1.10) 5.5-10(0.22-0.39) GH-351.1100.0
PG 13.5 20.4(0.80) 22 mm 6.5(0.26) 30.0(1.18) 08-13(0.32-0.52) GH-351.1300.0
PG 16 22.5(0.88) 24 mm 6.5(0.26) 30.0(1.18) 08-14(0.32-0.55) GH-351.1600.0
PG 21 28.3(1.11) 30 mm 7.0(0.28) 36.0(1.42) 11-18(0.43-0.71) GH-351.2100.0
PG 29 37.0(1.45) 40 mm 8.0(0.32) 26.0(1.42) 19-27(0.75-0.98) GH-351.2900.0
PG 36 47.0(1.84) 50 mm 9.0(0.35) 50.0(1.97) 26-35(1.02-1.38) GH-351.3600.0
PG 42 54.0(2.11) 57 mm 10.0(0.39) 50.0(1.97) 26-35(1.02-1.38) GH-351.4200.0
PG 48 59.3(2.33) 66 mm 10.0(0.39) 55.0(2.17) 39-48(1.54-1.89) GH-351.4800.0
Applications Features
Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated
These Strain Reliefs seal cable entries and prevent Temp: -30C to +120C (-22F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-780/784...
Dimensions mm (inch) - Part Numbers
Thread Thread Width Thread Approx. Cable entry Part PG-Sizes
PG-size O.D. across flats length total length Cable dia. Number
PG 7 12.5(0.49) 14 mm 5.0(0.19) 25.0(0.98) 3-6.5(0.12-0.26) GH-353.0700.0 For
PG 9 15.2(0.60) 17 mm 6.0(0.24) 28.0(1.10) 5.5-10(0.22-0.39) GH-353.0900.0 Shielded
PG 11 18.6(0.73) 20 mm 6.0(0.24) 28.0(1.10) 5.5-10(0.22-0.39) GH-353.1100.0 Cables
PG 13.5 20.4(0.80) 22 mm 6.5(0.26) 30.0(1.18) 08-13(0.32-0.52) GH-353.1300.0
PG 16 22.5(0.88) 24 mm 6.5(0.26) 30.0(1.18) 08-14(0.32-0.55) GH-353.1600.0
PG 21 28.3(1.11) 30 mm 7.0(0.28) 36.0(1.42) 11-18(0.43-0.71) GH-353.2100.0
PG 29 37.0(1.45) 40 mm 8.0(0.32) 26.0(1.42) 18-27(0.70-0.98) GH-353.2900.0


Sheet 2: F-B-02

Strain Reliefs and Accessories
High Performance Cable Glands
High Performance Strain Reliefs
Applications Features
Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated
These Strain Reliefs seal cable entries and prevent Temp: -30C to +120C (-22F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-785/786...
Dimensions mm (inch) - Part Numbers
Thread Thread Width Thread Approx. Cable entry Part Metric sizes
mm-size O.D. across flats length total length Cable dia. Number
M12x1.5 12(0.47) 14 mm 5.0(0.19) 25.0(0.98) 3-6.5(0.12-0.26) GH-356.1200.0
M16x1.5 16(0.63) 17 mm 5.5(0.22) 28.0(1.10) 5.5-10(0.22-0.39) GH-356.1600.0
M20x1.5 20(0.79) 22 mm 6.0(0.24) 28.0(1.10) 06-12(0.24-0.47) GH-356.2000.1
M20x1.5 20(0.79) 22 mm 6.0(0.24) 28.0(1.10) 08-13(0.32-0.52) GH-356.2000.0
M25x1.5 25(0.98) 30 mm 7.0(0.28) 30.0(1.18) 11-18(0.43-0.71) GH-356.2500.0
M32x1.5 32(1.26) 34 mm 8.0(0.32) 36.0(1.42) 15-21(0.59-0.83) GH-356.3200.0
M40x1.5 40(1.57) 44 mm 8.0(0.32) 40.0(1.57) 19-27(0.75-0.98) GH-356.4000.0
M50x1.5 50(1.97) 55 mm 9.0(0.35) 50.0(1.97) 26-35(1.02-1.38) GH-356.5000.0
M63x1.5 63(2.48) 66 mm 10.0(0.39) 50.0(1.97) 27-38(1.06-1.50 GH-356.6300.1
M63x1.5 63(2.48) 66 mm 10.0(0.39) 55.0(2.17) 39-48(1.54-1.89) GH-356.6300.0
Applications Features
Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated
These Strain Reliefs seal cable entries and prevent Temp: -30C to +120C (-22F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-785/786...
Dimensions mm (inch) - Part Numbers
Thread Thread Width Thread Approx. Cable entry Part Metric sizes
mm-size O.D. across flats length total length Cable dia. Number
M12x1.5 12(0.47) 14 mm 5.0(0.19) 25.0(0.98) 03-6.5(0.12-0.26) GH-357.1200.0 For
M16x1.5 16(0.63) 17 mm 5.5(0.22) 28.0(1.10) 5.5-10(0.22-0.39) GH-357.1600.0 Shielded
M20x1.5 20(0.79) 22 mm 6.0(0.24) 28.0(1.10) 08-13(0.32-0.52) GH-357.2000.0 Cables
M25x1.5 25(0.98) 30 mm 7.0(0.28) 30.0(1.18) 11-18(0.43-0.71) GH-357.2500.0
M32x1.5 32(1.26) 34 mm 8.0(0.32) 36.0(1.42) 15-21(0.59-0.83) GH-357.3200.0
M40x1.5 40(1.57) 44 mm 8.0(0.32) 40.0(1.57) 19-27(0.75-0.98) GH-357.4000.0
M50x1.5 50(1.97) 55 mm 9.0(0.35) 50.0(1.97) 26-35(1.02-1.38) GH-357.5000.0
M63x1.5 63(2.48) 66 mm 10.0(0.39) 55.0(2.17) 39-48(1.54-1.89) GH-357.6300.0


Sheet 3: F-B-03

Strain Reliefs and Accessories
High Performance Cable Glands
High Performance Strain Reliefs
Applications Features
Strong Strain Relief for straight-through cable entries. Material: stainless steel
These Strain Reliefs seal cable entries and prevent Temp: -40C to +120C (-40F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-789...
Dimensions mm (inch) - Part Numbers
Thread Thread Width Thread Approx. Cable entry Part Metric sizes
mm-size O.D. across flats length total length Cable dia. Number
M12x1.5 12(0.47) 14 mm 5.0(0.19) 25.0(0.98) 05-07(0.19-0.28) GH-387.1200.1 Stainless
M16x1.5 16(0.63) 17 mm 5.5(0.22) 28.0(1.10) 05-10(0.19-0.39) GH-387.1600.0 Steel
M20x1.5 20(0.79) 22 mm 6.0(0.24) 28.0(1.10) 09-14(0.35-0.55) GH-387.2000.0
M25x1.5 25(0.98) 30 mm 7.0(0.28) 30.0(1.18) 13-19(0.51-0.75) GH-387.2500.0
M32x1.5 32(1.26) 34 mm 8.0(0.32) 36.0(1.42) 15-22(0.59-0.87) GH-387.3200.0
M40x1.5 40(1.57) 44 mm 8.0(0.32) 40.0(1.57) 22-28(0.86-1.10) GH-387.4000.0
Applications Features
Strong Strain Relief for straight-through cable entries. Material: brass, nickel plated
These Strain Reliefs seal cable entries and prevent Temp: -40C to +120C (-40F to 248F)
contaminants from entering into enclosures.Completely Protection: IP68 watertight (5 bar)
insulated. With hexagon lower part and cord grips. Resistant to oil, water, ageing.
With O-ring at external thread. Hex Nuts: Series GH-785/786...
Thread Width Thread Quantities of holes Part Metric sizes
mm-size across flats length with diameters in mm and (inches) Number
M16x1.5 17 mm 5.5 mm (.21) 2 holes with 4 mm (.16) GH-366.1604.2
M16x1.5 17 mm 5.5 mm (.21) 2 holes with 4.5 mm (.18) GH-366.1605.2 Multiple
M16x1.5 17 mm 5.5 mm (.21) 3 holes with 4 mm (.16) GH-366.1604.3 Cable
M20x1.5 22 mm 6 mm (.24) 2 holes with 6 mm (.24) GH-366.2006.2 Entries
M20x1.5 22 mm 6 mm (.24) 2 holes with 4 mm (.16) GH-366.2004.2
M20x1.5 22 mm 6 mm (.24) 3 holes with 5 mm (.20) GH-366.2005.3
M25x1.5 30 mm 7 mm (.28) 2 holes with 7 mm (.28) GH-366.2507.2
M25x1.5 30 mm 7 mm (.28) 2 holes with 8 mm (.32) GH-366.2508.2
M25x1.5 30 mm 7 mm (.28) 2 holes with 9 mm (.36) GH-366.2509.2
M25x1.5 30 mm 7 mm (.28) 3 holes with 7 mm (.28) GH-366.2507.3
M25x1.5 30 mm 7 mm (.28) 3 holes with 8 mm (.32) GH-366.2508.3
M25x1.5 30 mm 7 mm (.28) 4 holes with 7 mm (.28) GH-366.2507.4
M25x1.5 30 mm 7 mm (.28) 8 holes with 1.5 mm (.06) GH-366.2501.8
M25x1.5 30 mm 7 mm (.28) 2 holes 1 x 5 mm (.20) and 1 x 12 mm (.47) GH-366.2512.2
M40x1.5 66 mm 8 mm (.32) 2 holes 1 x 7 mm (.28) and 1 x 14 mm (.55) GH-366.4014.2
M40x1.5 66 mm 8 mm (.32) 2 holes 1 x 10 mm (.40) and 1 x 15.6 mm (.61) GH-366.4016.2


Sheet 4: F-B-04

Strain Reliefs and Accessories
Nuts for Adaptors, Cable Glands and Plugs
Lock Nuts PG
Applications Features
Hex Nuts PG for all Adaptors, Plugs
or Cable Glands Temp: -20C to +100C (-4F to 212F)
Flat version for normal fastening, or cutting edge Resistant to oil, water, ageing.
version for contacting the metal. (equipotential bonding) Material: brass, nickel plated
Dimensions mm (inch) - Part Numbers
Thread Width O.D. Thickness Part PG Sizes
PG-size across flats Hex Number Normal Flat
PG 7 15(0.59) 16.6(0.65) 2.8(0.11) GH-780.0700.0
PG 9 18(0.71) 20.0(0.79) 2.8(0.11) GH-780.0900.0
PG 11 21(0.83) 23.5(0.93) 3.0(0.12) GH-780.1100.0
PG 13.5 23(0.91) 25.5(1.01) 3.0(0.12) GH-780.1300.0
PG 16 26(1.05) 29.0(1.14) 3.0(0.12) GH-780.1600.0
PG 21 32(1.26) 35.5(1.40) 3.5(0.14) GH-780.2100.0
PG 29 41(1.61) 45.0(1.57) 4.0(0.16) GH-780.2900.0
PG 36 51(2.00) 56.0(2.21) 5.0(0.20) GH-780.3600.0
PG 42 60(2.36) 65.0(2.56) 5.0(0.20) GH-780.4200.0
PG 48 64(2.52) 69.0(2.72) 5.5(0.22) GH-780.4800.0
Dimensions mm (inch) - Part Numbers
Thread Width O. D. Thickness Part PG Sizes
PG-size across flats Hex Number Normal Flat
PG 7 15(0.59) 16.6(0.65) 4.2(0.17) GH-784.0700.0 with
PG 9 18(0.71) 20.0(0.79) 4.2(0.17) GH-784.0900.0 cutting edge
PG 11 21(0.83) 23.5(0.93) 4.2(0.17) GH-784.1100.0
PG 13.5 23(0.91) 25.5(1.01) 4.2(0.17) GH-784.1300.0
PG 16 26(1.05) 29.0(1.14) 4.2(0.17) GH-784.1600.0
PG 21 32(1.26) 35.5(1.40) 4.8(0.19) GH-784.2100.0
PG 29 41(1.61) 45.0(1.57) 5.4(0.21) GH-784.2900.0
PG 36 51(2.00) 56.0(2.21) 6.5(0.26) GH-784.3600.0

Sheet 5: F-B-05

Strain Reliefs and Accessories
Nuts for Adaptors, Cable Glands and Plugs
Lock Nuts Metric
Applications Features
Hex Nuts Metric for all Adaptors, Plugs
or Cable Glands Temp: -20C to +100C (-4F to 212F)
Flat version for normal fastening, or cutting edge Resistant to oil, water, ageing.
version for contacting the metal. (equipotential bonding) Material: brass, nickel plated
Material: stainless steel
Dimensions mm (inch) - Part Numbers
Thread Width O.D. Thickness Part Metric Sizes
mm-size across flats Hex Number Normal Flat
M12x1.5 15(0.59) 16.6(0.65) 2.8(0.11) GH-785.1200.0
M16x1.5 19(0.75) 21.0(0.83) 2.8(0.11) GH-785.1600.0
M20x1.5 24(0.95) 26.7(1.05) 3.0(0.12) GH-785.2000.0
M25x1.5 29(1.45) 32.0(1.26) 3.5(0.14) GH-785.2500.0
M32x1.5 36(1.84) 39.0(1.54) 4.0(0.16) GH-785.3200.0
M40x1.5 46(1.81) 50.0(1.97) 4.5(0.18) GH-785.4000.0
M50x1.5 57(2.24) 61.0(2.40) 5.0(0.20) GH-785.5000.0
M63x1.5 70(2.76) 78.0(3.07) 6.0(0.24) GH-785.6300.0
Dimensions mm (inch) - Part Numbers
Thread Width O. D. Thickness Part Metric Sizes
mm-size across flats Hex Number Normal Flat
M12x1.5 15(0.59) 16.6(0.65) 4.1(0.16) GH-786.1200.0 with
M16x1.5 19(0.75) 21.0(0.83) 4.2(0.17) GH-786.1600.0 cutting edge
M20x1.5 24(0.95) 26.7(1.05) 4.2(0.17) GH-786.2000.0
M25x1.5 30(1.18) 32.0(1.26) 4.8(0.19) GH-786.2500.0
M32x1.5 36(1.42) 39.0(1.54) 5.4(0.21) GH-786.3200.0
M40x1.5 46(1.81) 50.0(1.97) 6.2(0.24) GH-786.4000.0
M50x1.5 60(3.36) 61.0(2.40) 7.0(0.28) GH-786.5000.0
M63x1.5 70(2.76) 78.0(3.07) 7.0(0.28) GH-786.6300.0
Dimensions mm (inch) - Part Numbers
Thread Width O. D. Thickness Part Metric Sizes
mm-size across flats Hex Number Normal Flat
M12x1.5 15(0.59) 16.6(0.65) 3.0(0.12) GH-789.1200.0 stainless steel
M16x1.5 19(0.75) 21.0(0.83) 3.0(0.12) GH-789.1600.0
M20x1.5 24(0.95) 26.7(1.05) 3.5(0.14) GH-789.2000.0
M25x1.5 30(1.18) 32.0(1.26) 3.5(0.14) GH-789.2500.0
M32x1.5 36(1.42) 39.0(1.54) 4.0(0.16) GH-789.3200.0
M40x1.5 46(1.81) 50.0(1.97) 4.5(0.18) GH-789.4000.0

Sheet 6: F-B-06

Strain Reliefs and Accessories
Adaptors
Adaptors Metric / PG and PG - NPT
Applications Features
Adaptors with external metric thread to convert Material: brass, nickel plated
to an internal PG thread. For sealing purposes please Temp: -20C to +100C (-4F to 212F)
order O-rings GH-871... Protection: IP68 (if sealed with O-ring)
Resistant to oil, water, ageing.
Hex Nuts: Series GH-785/786...
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Thread Part Metric/PG
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
M12x1.5 PG 7 14(0.55) 10.0(0.39) 5(0.20) 12(0.47) GH-510.1207.0
M16x1.5 PG 9 18(0.71) 10.5(0.41) 5(0.20) 16(0.63) GH-510.1609.0
M20x1.5 PG 11 22(0.88) 11.0(0.43) 6(0.24) 20(0.79) GH-510.2011.0
M20x1.5 PG 13.5 22(0.88) 12.5(0.49) 6(0.24) 20(0.79) GH-510.2013.0
M20x1.5 PG 16 24(0.95) 13.5(0.53) 6(0.24) 20(0.79) GH-510.2016.0
M25x1.5 PG 21 30(1.18) 15.0(0.59) 7(0.28) 25(0.98) GH-510.2521.0
M32x1.5 PG 29 39(1.54) 16.5(0.65) 8(0.32) 32(1.26) GH-510.3229.0
M40x1.5 PG 36 50(1.97) 19.5(0.77) 8(0.32) 40(1.57) GH-510.4036.0
M50x1.5 PG 42 57(2.24) 22.0(0.87) 9(0.35) 50(1.97) GH-510.5042.0
M63x1.5 PG 48 68(2.68) 23.0(0.92) 10(0.39) 63(2.48) GH-510.6348.0
Applications Features
Adaptors with external PG thread to convert Material: brass, nickel plated
to an internal NPT thread. The external PG thread Temp: -20C to +100C (-4F to 212F)
is sealed with O-ring. Protection: IP68
Resistant to oil, water, ageing.
Hex Nuts: Series GH-780/784...
Dimensions mm (inch) - Part Numbers
Thread Thread O.D. Heights Thread Thread Part PG/NPT
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
PG 11 3/8" NPT 20(0.79) 14(0.56) 6.0(0.24) 18.6(0.73) PMNF-110.038
PG 11 1/2" NPT 24(0.95) 16(0.63) 6.0(0.24) 18.6(0.73) PMNF-110.012
PG 13.5 1/2" NPT 24(0.95) 18(0.71) 6.5(0.26) 20.4(0.80) PMNF-135.012
PG 16 1/2" NPT 24(0.95 18(0.71) 6.5(0.26) 22.5(0.88) PMNF-160.012
PG 21 3/4" NPT 30(1.19) 18(0.71) 7.0(0.28) 28.3(1.11) PMNF-210.034
PG 29 1" NPT 39(1.54) 18(0.71) 8.0(0.32) 37.0(1.45) PMNF-290.100
PG 36 1-1/4" NPT 50(1.97) 20(0.79) 9.0(0.36) 47.0(1.84) PMNF-360.114
PG 42 1-1/2" NPT 57(2.25) 18(0.71) 10(0.39) 54.0(2.11) PMNF-420.112

Sheet 7: F-B-07

Strain Reliefs and Accessories
Enlargers
Enlargements Metric/Metric
Applications Features
Adaptors with smaller outside diameter and bigger Material: brass, nickel plated
inside diameter to enlarge the mounting thread. Temp: -20C to +100C (-4F to 212F)
For sealing purposes order O-rings GH-871... Protection: IP68 (if sealed with O-ring)
Resistant to oil, water, ageing.
Hex Nuts: Series GH-785/786...
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Thread Part Metric/Metric
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
M12x1.5 M16x1.5 18(0.71) 10.5(0.41) 5(0.19) 12/16(0.47/0.63) GH-731.1216.0
M16x1.5 M20x1.5 22(0.88) 12.5(0.49) 5(0.19) 16/20(0.63/0.79) GH-731.1620.0
M20x1.5 M25x1.5 27(1.06) 14.0(0.55) 6(0.24) 20/25(0.79/0.98) GH-731.2025.0
M25x1.5 M32x1.5 34(1.34) 15.5(0.61) 7(0.28) 25/32(0.98/1.26) GH-731.2532.0
M25x1.5 M40x1.5 42(1.65) 16.5(0.65) 7(0.28) 25/40(0.98/1.57) GH-731.2540.0
M32x1.5 M40x1.5 42(1.65) 16.5(0.65) 8(0.32) 32/40(1.26/1.57) GH-731.3240.0
M32x1.5 M50x1.5 52(2.05) 19.5(0.77) 8(0.32) 32/50(1.26/1.97) GH-731.3250.0
M40x1.5 M50x1.5 52(2.05) 19.5(0.77) 8(0.32) 40/50(1.57/1.97) GH-731.4050.0
M50x1.5 M63x1.5 66(2.60) 22.0(0.87) 9(0.35) 50/63(1.97/2.48) GH-731.5063.0
Enlargements PG/PG
Applications Features
Adaptors with smaller outside diameter and bigger Material: brass, nickel plated
inside diameter to enlarge the mounting thread. Temp: -20C to +100C (-4F to 212F)
For sealing purposes order O-rings GH-871... Protection: IP68 (if sealed with O-ring)
Resistant to oil, water, ageing.
Hex Nuts: Series GH-780/784...
Dimensions mm (inch) - Part Numbers
Thread Thread O.D. Heights Thread Thread Part PG/PG
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
PG7 PG9 17(0.67) 10.0(0.39) 5.0(0.20) 07/09(0.49/0.60) GH-730.0709.0
PG 9 PG 11 20(0.79) 10.5(0.42) 6.0(0.24) 09/11(0.60/0.73) GH-730.0911.0
PG 9 PG 13.5 22(0.87) 11.5(0.46) 6.0(0.24) 09/13(0.60/0.80) GH-730.0913.0
PG 11 PG 13.5 22(0.87) 11.5(0.46) 6.0(0.24) 11/13(0.73/0.80) GH-730.1113.0
PG 11 PG 16 24(0.95) 12.5(0.50) 6.0(0.24) 11/16(0.73/0.88) GH-730.1116.0
PG 13.5 PG 16 24(0.95) 12.5(0.50) 6.5(0.26) 13/16(0.80/0.88) GH-730.1316.0
PG 13.5 PG 21 30(1.19) 14.5(0.58) 6.5(0.26) 13/21(0.80/1.11) GH-730.1321.0
PG 16 PG 21 30(1.19) 14.5(0.58) 6.5(0.26) 16/21(0.88/1.11) GH-730.1621.0
PG 21 PG 29 39(1.54) 16.0(0.63) 7.0(0.28) 21/29(1.11/1.45) GH-730.2129.0
PG 29 PG 36 50(1.97) 19.5(0.77) 8.0(0.32) 29/36(1.45/1.84) GH-730.2936.0
PG 36 PG 42 57(2.25) 22.0(0.87) 9.0(0.36) 36/42(1.84/2.11) GH-730.3642.0
PG 42 PG 48 64(2.53) 23.0(0.91) 10.0(0.39) 42/48(2.11/2.33) GH-730.4248.0

Sheet 8: F-B-08

Strain Reliefs and Accessories
Reducers
Reductions PG to PG and PG/Metric
Applications Features
Adaptors with bigger outside diameter and smaller Material: brass, nickel plated
inside diameter to decrease the mounting thread. Temp: -20C to +100C (-4F to 212F)
For sealing purposes order O-rings GH-871... Protection: IP68 (if sealed with O-ring)
Resistant to oil, water, ageing.
Hex Nuts: Series GH-780/784...
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Thread Part PG/PG
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
PG 9 PG 7 17(0.67) 2.5(0.10) 6.0(0.24) PG 9(0.49) GH-700.0907.0
PG 11 PG 7 20(0.79) 2.5(0.10) 6.0(0.24) PG 11(0.73) GH-700.1107.0
PG 11 PG 9 20(0.79) 2.5(0.10) 6.0(0.24) PG 11(0.73) GH-700.1109.0
PG 13.5 PG 7 22(0.87) 3.5(0.14) 6.5(0.26) PG 13.5(0.80) GH-700.1307.0
PG 13.5 PG 9 22(0.87) 3.5(0.14) 6.5(0.26) PG 13.5(0.80) GH-700.1309.0
PG 13.5 PG 11 22(0.87) 3.5(0.14) 6.5(0.26) PG 13.5(0.80) GH-700.1311.0
PG 16 PG 7 24(0.95) 3.0(0.12) 6.5(0.26) PG 16(0.88) GH-700.1607.0
PG 16 PG 9 24(0.95) 3.0(0.12) 6.5(0.26) PG 16(0.88) GH-700.1609.0
PG 16 PG 11 24(0.95) 3.0(0.12) 6.5(0.26) PG 16(0.88) GH-700.1611.0
PG 16 PG 13.5 24(0.95) 3.0(0.12) 6.5(0.26) PG 16(0.88) GH-700.1613.0
PG 21 PG 11 30(1.19) 3.0(0.12) 7.0(0.28) PG 21(1.11) GH-700.2111.0
PG 21 PG 13.5 30(1.19) 3.0(0.12) 7.0(0.28) PG 21(1.11) GH-700.2113.0
PG 21 PG 16 30(1.19) 3.0(0.12) 7.0(0.28) PG 21(1.11) GH-700.2116.0
PG 29 PG 16 39(1.54) 3.5(0.14) 8.0(0.32) PG 29(1.45) GH-700.2916.0
PG 29 PG 21 39(1.54) 3.5(0.14) 8.0(0.32) PG 29(1.45) GH-700.2921.0
PG 36 PG 21 50(1.97) 3.5(0.14) 9.0(0.36) PG 36(1.84) GH-700.3621.0
PG 36 PG 29 50(1.97) 3.5(0.14) 9.0(0.36) PG 36(1.84) GH-700.3629.0
PG 42 PG 29 57(2.25) 4.0(0.16) 10(0.39) PG 42(2.11) GH-700.4229.0
PG 42 PG 36 57(2.25) 4.0(0.16) 10(0.39) PG 42(2.11) GH-700.4236.0
PG 48 PG 36 64(2.53) 4.0(0.16) 10(0.39) PG 48(2.33) GH-700.4836.0
PG 48 PG 42 64(2.53) 4.0(0.16) 10(0.39) PG 48(2.33) GH-700.4842.0
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Thread Part PG/Metric
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
PG 09 M16x1.5 20(0.79) 9.0(0.35) 6.0(0.24) PG09(0.49) GH-705.0916.0
PG 11 M20x1.5 22(0.87) 10.0(0.39) 6.0(0.24) PG11(0.73) GH-705.1120.0
PG 13.5 M20x1.5 24(0.95) 10.0(0.39) 6.5(0.26) PG13.5(0.80) GH-705.1320.0
PG 16 M20x1.5 24(0.95) 3.0(0.12) 6.5(0.26) PG 16(0.88) GH-705.1620.0
PG 21 M20x1.5 30(1.19) 3.0(0.12) 7.0(0.28) PG 21(1.11) GH-705.2120.0
PG 21 M25x1.5 30(1.19) 3.0(0.12) 7.0(0.28) PG 21(1.11) GH-705.2125.0
PG 29 M25x1.5 39(1.54) 3.5(0.14) 8.0(0.32) PG 29(1.45) GH-705.2925.0

Sheet 9: F-B-09

Strain Reliefs and Accessories
Reducer
Reductions Metric/Metric - Metric/PG
Applications Features
Adaptors with bigger outside diameter and smaller Material: brass, nickel plated
inside diameter to decrease the mounting thread. Temp: -20C to +100C (-4F to 212F)
For sealing purposes order O-rings GH-871... Protection: IP68 (if sealed with O-ring)
Resistant to oil, water, ageing.
Hex Nuts: Series GH-785/786...
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Thread Part Metric/Metric
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
M16x1.5 M12x1.5 18(0.71) 2.5(0.10) 5(0.20) 16(0.63) GH-701.1612.0
M20x1.5 M12x1.5 22(0.88) 3.0(0.12) 6(0.24) 20(0.79) GH-701.2012.0
M20x1.5 M16x1.5 22(0.88) 3.0(0.12) 6(0.24) 20(0.79) GH-701.2016.0
M25x1.5 M16x1.5 27(1.06) 3.0(0.12) 7(0.28) 25(0.98) GH-701.2516.0
M25x1.5 M20x1.5 27(1.06) 3.0(0.12) 7(0.28) 25(0.98) GH-701.2520.0
M32x1.5 M20x1.5 34(1.34) 3.0(0.12) 8(0.32) 32(1.26) GH-701.3220.0
M32x1.5 M25x1.5 34(1.34) 3.0(0.12) 8(0.32) 32(1.26) GH-701.3225.0
M40x1.5 M25x1.5 43(1.69) 3.5(0.14) 8(0.32) 40(1.57) GH-701.4025.0
M40x1.5 M32x1.5 43(1.69) 3.5(0.14) 8(0.32) 40(1.57) GH-701.4032.0
M50x1.5 M32x1.5 53(2.09) 3.5(0.14) 9(0.35) 50(1.97) GH-701.5032.0
M50x1.5 M40x1.5 53(2.09) 3.5(0.14) 9(0.35) 50(1.97) GH-701.5040.0
M63x1.5 M40x1.5 66(2.60) 4.0(0.16) 10(0.39) 63(2.48) GH-701.6340.0
M63x1.5 M50x1.5 66(2.60) 4.0(0.16) 10(0.39) 63(2.48) GH-701.6350.0
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Thread Part Metric/PG
(external) (internal) (body) (w/o thread) length (ext.) diameter (ext.) Number
M16x1.5 PG 7 18(0.71) 2.5(0.10) 5(0.19) 16(0.63) GH-706.1607.0
M20x1.5 PG 9 22(0.88) 3.0(0.12) 6(0.24) 20(0.79) GH-706.2009.0
M25x1.5 PG 11 27(1.06) 3.0(0.12) 7(0.28) 25(0.98) GH-706.2511.0
M25x1.5 PG 13.5 27(1.06) 3.0(0.12) 7(0.28) 25(0.98) GH-706.2513.0
M25x1.5 PG 16 27(1.06) 3.0(0.12) 7(0.28) 25(0.98) GH-706.2516.0
M32x1.5 PG 16 34(1.34) 3.0(0.12) 8(0.32) 32(1.26) GH-706.3216.0
M32x1.5 PG 21 34(1.34) 3.0(0.12) 8(0.32) 32(1.26) GH-706.3221.0
M40x1.5 PG 21 43(1.69) 3.5(0.14) 8(0.32) 40(1.57) GH-706.4021.0
M50x1.5 PG 29 53(2.09) 3.5(0.14) 9(0.35) 50(1.97) GH-706.5029.0
M63x1.5 PG 36 66(2.60) 4.0(0.16) 10(0.39) 63(2.48) GH-706.6336.0
M63x1.5 PG 42 66(2.60) 4.0(0.16) 10(0.39) 63(2.48) GH-706.6342.0

Sheet 10: F-B-10

Strain Reliefs and Accessories
Plugs
Plugs PG Sizes
Applications Features
Plugs with external PG thread to prevent Material: brass, nickel plated
contaminants from entering into enclosures. Temp: -20C to +100C (-4F to 212F)
The best way to keep open threaded holes completely Protection: IP68 (if sealed with O-ring)
closed. Resistant to oil, water, ageing.
Hex Nuts: Series GH-785/780...
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Part w/o O-ring
PG-size O.D. Top (w/o thread) length (ext.) Number
PG 7 12.5(0.49) 14(0.55) 3.0(0.12) 5.0(0.19) GH-750.0700.0
PG 9 15.2(0.60) 17(0.67) 3.0(0.12) 6.0(0.24) GH-750.0900.0
PG 11 18.6(0.73) 20(0.79) 3.0(0.12) 6.0(0.24) GH-750.1100.0
PG 13.5 20.4(0.80) 22(0.87) 3.0(0.12) 6.5(0.26) GH-750.1300.0
PG 16 22.5(0.88) 24(0.95) 3.0(0.12) 6.5(0.26) GH-750.1600.0
PG 21 28.3(1.11) 30(1.19) 4.0(0.16) 7.0(0.28) GH-750.2100.0
PG 29 37.0(1.45) 39(1.54) 4.0(0.16) 8.0(0.32) GH-750.2900.0
PG 36 47.0(1.84) 50(1.97) 6.0(0.24) 9.0(0.35) GH-750.3600.0
PG 42 54.0(2.11) 57(2.25) 6.0(0.24) 10(0.39) GH-750.4200.0
PG 48 59.3(2.33) 64(2.53) 6.0(0.24) 10(0.39) GH-750.4800.0
Dimensions mm (inch) - Part Numbers with O-ring
Thread Thread O. D. Heights Thread Part
PG-size O.D. Top (w/o thread) length (ext.) Number
PG 7 12.5(0.49) 15(0.59) 2.5(0.10) 5.0(0.19) GH-752.0700.0
PG 9 15.2(0.60) 18(0.71) 3.0(0.12) 5.0(0.19) GH-752.0900.0
PG 11 18.6(0.73) 22(0.87) 3.0(0.12) 5.0(0.19) GH-752.1100.0
PG 13.5 20.4(0.80) 24(0.95) 3.0(0.12) 6.0(0.24) GH-752.1300.0
PG 16 22.5(0.88) 26(1.02) 3.0(0.12) 6.0(0.24) GH-752.1600.0
PG 21 28.3(1.11) 32(1.26) 4.0(0.16) 6.0(0.24) GH-752.2100.0
PG 29 37.0(1.45) 40(1.58) 4.0(0.16) 8.0(0.32) GH-752.2900.0

Sheet 11: F-B-11

Strain Reliefs and Accessories
Plugs
Plugs Metric Sizes
Applications Features
Plugs with external Metric thread to prevent Material: brass, nickel plated
contaminants from entering into enclosures. Temp: -20C to +100C (-4F to 212F)
The best way to keep open threaded holes completely Protection: IP68 (if sealed with O-ring)
closed. Resistant to oil, water, ageing.
Hex Nuts: Series GH-785/780...
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Part w/o O-ring
mm-size O.D. Top (w/o thread) length (ext.) Number
M12x1.5 12(0.47) 14(0.55) 2.5(0.10) 5(0.19) GH-755.1200.0
M16x1.5 16(0.63) 18(0.71) 3.0(0.12) 5(0.19) GH-755.1600.0
M20x1.5 20(0.79) 22(0.88) 3.5(0.14) 6(0.24) GH-755.2000.0
M25x1.5 25(0.98) 28(1.10) 4.0(0.16) 7(0.28) GH-755.2500.0
M32x1.5 32(1.26) 35(1.38) 4.0(0.16) 8(0.32) GH-755.3200.0
M40x1.5 40(1.57) 43(1.69) 5.0(0.19) 8(0.32) GH-755.4000.0
M50x1.5 50(1.97) 53(2.09) 6.0(0.24) 9(0.35) GH-755.5000.0
M63x1.5 63(2.48) 66(2.60) 6.0(0.24) 10(0.39) GH-755.6300.0
Dimensions mm (inch) - Part Numbers
Thread Thread O. D. Heights Thread Part with O-ring
mm-size O.D. Top (w/o thread) length (ext.) Number
M12x1.5 12(0.47) 14(0.55) 2.5(0.10) 5(0.19) GH-758.1200.0
M16x1.5 16(0.63) 18(0.71) 3.0(0.12) 5(0.19) GH-758.1600.0
M20x1.5 20(0.79) 22(0.88) 3.5(0.14) 6(0.24) GH-758.2000.0
M25x1.5 25(0.98) 28(1.10) 4.0(0.16) 7(0.28) GH-758.2500.0
M32x1.5 32(1.26) 35(1.38) 4.0(0.16) 8(0.32) GH-758.3200.0
M40x1.5 40(1.57) 44(1.73) 5.0(0.19) 8(0.32) GH-758.4000.0
M50x1.5 50(1.97) 54(2.12) 6.0(0.24) 9(0.35) GH-758.5000.0
M63x1.5 63(2.48) 67(2.64) 6.0(0.24) 10(0.39) GH-758.6300.0

Sheet 12: F-B-12

Strain Reliefs and Accessories
O-rings
Sealing Rings
Applications Features
Provide an external seal between the adaptors, Material: Perbunan (NBR)
reducers, enlargers, cord grips, strain reliefs etc... Temp: -40C to +140C (-40F to 282F)
and the enclosure wall. Resistant to oil, water, ageing.
Dimensions mm (inch) - Part Numbers
Outer Inner Ring Usable Usable Usable Part for Metric
diameter diameter thickness for for for Number for PG
13(0.51) 10(0.39) 1.5(0.06) M 12 PG 7 1/4" NPT GH-871.0700.0 for NPT
16(0.63) 13(0.51) 1.5(0.06) M 16 PG 9 3/8" NPT GH-871.0900.0
19(0.75) 16(0.63) 1.5(0.06) M 20 PG 11 - GH-871.1100.0
21(0.83) 18(0.71) 1.5(0.06) - PG 13.5 1/2" NPT GH-871.1300.0
23(0.91) 20(0.79) 1.5(0.06) - PG 16 5/8" NPT GH-871.1600.0
26(1.02) 22(0.87) 2.0(0.08) M 25 - 1" NPT GH-871.2515.0
29(1.14) 25(0.98 2.0(0.08) - PG 21 - GH-871.2100.0
33(1.30) 29(1.45) 2.0(0.08) M 32 - - GH-871.3215.0
37(1.46) 33(1.30) 2.0(0.08) - PG 29 1 1/8" NPT GH-871.2900.0
41(1.61) 37(1.45) 2.0(0.08) M 40 - - GH-871.4015.0
47(1.85) 43(1.69) 2.0(0.08) - PG 36 1 1/2 NPT GH-871.3600.0
51(2.04) 47(1.84) 2.0(0.08) M 50 - - GH-871.5015.0
54(2.13) 50(1.97) 2.0(0.08) - PG 42 1 3/4" NPT GH-871.4200.0
59(2.32) 55(2.17) 2.0(0.08) - PG 48 2 " NPT GH-871.4800.0
64(2.52) 60(2.36) 2.0(0.08) M 63 - - GH-871.6315.0